Cert III in Solid Plastering - CPC31020
Qualification Overview:
Qualification Name:
Cert III in Solid Plastering
Qualification Code and Units of Competency:
CPC31020
Processing time:
You can get your desired qualification through RPL pathways within four weeks of getting the sufficient information and evidence of the supporting documents.
Why study Cert III in Solid Plastering ?
This certificate offers a trade outcome in solid plastering for residential and commercial work. The qualification’s core unit of competency criteria address both the solid plastering speciality area of work and common abilities for the building sector. Solid plasterers use plaster, cement, and other substances to smooth or decorate inside walls and render outside walls.
Different licencing, legislative, regulatory, or certification requirements may apply to state and territorial governments. To validate those criteria, relevant state and territorial regulatory agencies should be contacted.
The Australian apprenticeship programme is appropriate for this qualification.
Anyone performing construction work must complete the general construction induction training programme, which is outlined in the Safe Work Australia model Code of Practice: Construction Work. Obtaining CPCCWHS1001 This criteria is satisfied by preparation for safe work in the construction sector.
How RPL ADVISOR assist you?
We can give you a FREE RPL Quote today !
RPL ADVISOR recognises the need to convert an overseas qualification into an Australian national qualification, and we offer a variety of fast and simple RPL distance training programs through our partner RTOs to meet any relevant requirements for Australia.
RPL ADVISOR can turn your expertise, talents, knowledge, or overseas credentials into a nationally recognised Australian certification through a comprehensive partner network of Registered Training Organisations (RTOs). The RPL evaluation process can often be done with established proof of your skills and does not necessitate further review.
- Photo (latest)
- Passport
- Resume / CV
- Payslips/work contract/ABN if self-employed
- Letter of Employment (onshore / offshore)
- Current employment contracts
- Evidence of overseas qualifications (if available)
- Transcripts or assessments from related previous qualifications.
- Videos or photos at your work (at least 2 from each task)
- Apprenticeship papers (if available)
- OHS/WHS policies and procedures
- Safe work method statements
- Job safety analysis (if available)
- Evaluation: One of experienced RPL ADVISOR consultants can conduct a free, no-obligation RPL skills check.
- Your Experience: Compiling and submitting your ‘Experience Portfolio’, which includes photographs and videos of you on the job, references, past credentials, and your latest resume, among other things.
- RTO Reviews the Evidence: Using an RPL assessment, a certified assessor from one of our collaborating RTOs can review the evidence and decide whether you are competent in the units for that certification.
- Interview: If all supporting documents meet the requirement of the desired qualification, then the RTO may take your interview.
- Your Certificate: If the RTO determines that you are qualified in all relevant units of competency, the Registered Training Organisation will grant you a certificate.
Cert III in Solid Plastering
To achieve this qualification, the candidate must demonstrate competency in:
- 20 units of competency:
- 15 core units
- 5 elective units.
Electives are to be selected as follows:
- all five units from the electives listed below, or
- four units from the electives listed below, plus one unit selected from any current training package or accredited course as long as it contributes to a valid, industry-supported vocational outcome, maintains the integrity of the AQF level of this qualification and does not duplicate the outcome of another unit used to achieve this qualification.
Pre-requisite units
An asterisk (*) against a unit code below indicates that there is a prerequisite requirement that must be met. Prerequisite unit(s) must be assessed before assessment of any unit of competency with an asterisk. Check the unit of competency for information on specific prerequisite requirements. All prerequisite requirements are packaged in the qualification.
CORE UNITS
| CPCCCM2006 | Apply basic levelling procedures |
| CPCCCM2008* | Erect and dismantle restricted height scaffolding |
| CPCCOM1012 | Work effectively and sustainably in the construction industry |
| CPCCOM1013 | Plan and organise work |
| CPCCOM1014 | Conduct workplace communication |
| CPCCOM1015 | Carry out measurements and calculations |
| CPCCOM2001* | Read and interpret plans and specifications |
| CPCCSP2001* | Handle solid plastering materials |
| CPCCSP2002* | Use solid plastering tools and equipment |
| CPCCSP2003* | Prepare surfaces for plastering |
| CPCCSP3001* | Apply float and render to straight and curved surfaces |
| CPCCSP3002* | Apply set coats |
| CPCCSP3003* | Apply trowelled texture coat finishes |
| CPCCSP3004* | Restore and renovate solid plasterwork |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
Elective units
| BSBESB301 | Investigate business opportunities |
| BSBESB407 | Manage finances for new business ventures |
| CPCCCM2007* | Use explosive power tools |
| CPCCCM2012* | Work safely at heights |
| CPCCCM3001 | Operate elevated work platforms to 11 metres |
| CPCCCO2013* | Carry out concreting to simple forms |
| CPCCPB3015* | Install acoustic and thermal environmental protection systems |
| CPCCPB3026* | Erect and maintain trestle and plank systems |
| CPCCSP3005* | Install pre-cast decorative mouldings |
| CPCCSP3006* | Install cast plaster blockwork and wall panels |
| CPCCSP3007* | Apply plaster by projection machine |
| CPCCSP3008* | Carry out conite construction and wall sheet panelling |
