Cert III in Process Manufacturing - MSM30116
Qualification Overview:
Qualification Name:
Cert III in Process Manufacturing
Qualification Code and Units of Competency:
MSM30116
Processing time:
You can get your desired qualification through RPL pathways within four weeks of getting the sufficient information and evidence of the supporting documents.
Why study Cert III in Process Manufacturing ?
The MSM30116 Certificate III in Process Manufacturing equips advanced production professionals with the skills needed to operate a variety of tools and perform support duties straight related to the creation of goods. They would perform more complex tasks than employees with a Certificate II in Process Manufacturing, following operating guidelines and applying their knowledge to predict issues and find solutions to a variety of anticipated and unforeseen issues.
This qualification is intended for usage in the following process manufacturing sectors:
- Oil, hydrocarbon and chemical refining
- Cable, plastic and rubber making
- Mineral products manufacturing.
It includes the same electives but various packaging limits into providing a qualification for employees who cannot meet the technical standards of PMA, PMB, or PMC.
How RPL ADVISOR assist you?
We can give you a FREE RPL Quote today !
RPL ADVISOR recognises the need to convert an overseas qualification into an Australian national qualification, and we offer a variety of fast and simple RPL distance training programs through our partner RTOs to meet any relevant requirements for Australia.
RPL ADVISOR can turn your expertise, talents, knowledge, or overseas credentials into a nationally recognised Australian certification through a comprehensive partner network of Registered Training Organisations (RTOs). The RPL evaluation process can often be done with established proof of your skills and does not necessitate further review.
- Photo (latest)
- Passport
- Resume / CV
- Payslips/work contract/ABN if self-employed
- Letter of Employment (onshore / offshore)
- Current employment contracts
- Evidence of overseas qualifications (if available)
- Transcripts or assessments from related previous qualifications.
- Videos or photos at your work (at least 2 from each task)
- Apprenticeship papers (if available)
- OHS/WHS policies and procedures
- Safe work method statements
- Job safety analysis (if available)
- Evaluation: One of experienced RPL ADVISOR consultants can conduct a free, no-obligation RPL skills check.
- Your Experience: Compiling and submitting your ‘Experience Portfolio’, which includes photographs and videos of you on the job, references, past credentials, and your latest resume, among other things.
- RTO Reviews the Evidence: Using an RPL assessment, a certified assessor from one of our collaborating RTOs can review the evidence and decide whether you are competent in the units for that certification.
- Interview: If all supporting documents meet the requirement of the desired qualification, then the RTO may take your interview.
- Your Certificate: If the RTO determines that you are qualified in all relevant units of competency, the Registered Training Organisation will grant you a certificate.
Cert III in Process Manufacturing
To be awarded the MSM30116 Certificate III in Process Manufacturing, competency must be achieved in twenty-one (21)
units of competency:
- four (4) core units of competency
- seventeen (17) elective units of competency, as specified below:
- a minimum of five (5) units from Group A
- a maximum of twelve (12) units from Group B.
Note : Where pre-requisite units are identified they must be counted in the total number of units required for achievement of the qualification.
CORE UNITS
Unit code | Unit title | |
MSMENV272 | Participate in environmentally sustainable work practices | |
MSMWHS200 | Work safely | |
MSMSUP210 | Process and record information | |
MSS402051 | Apply quality standards |
Elective Units
Group A Elective units
Unit code | Unit title | Prerequisites |
MEM03001B | Perform manual production assembly | |
MEM03006B | Set assembly stations | |
MEM09002B | Interpret technical drawing | |
MEM09204A | Produce basic engineering detail drawings | MEM09002B |
MEM11005B | Pick and process order | |
MEM11006B | Perform production packaging | |
MEM11007B | Administer inventory procedures | |
MEM12023A | Perform engineering measurements | |
MEM15001B | Perform basic statistical quality control | |
MEM15003B | Use improvement processes in team activities | MEM16007A |
MEM15004B | Perform inspection | |
MSL973013 | Perform basic tests | |
MSMBIO301 | Process biomass using pyrolyser | |
MSMBIO302 | Ferment biomaterial to produce bioproducts | |
MSMBIO303 | Distil bioproducts | |
MSMBIO304 | Separate and recover bioproducts | |
MSMOPS301 | Treat corrosion | |
MSMOPS363 | Organise on-site work | |
MSMPER300 | Issue work permits | MSMWHS201 |
MSMSUP300 | Identify and apply process improvements | |
MSMSUP301 | Apply HACCP to the workplace | |
MSMSUP303 | Identify equipment faults | |
MSMSUP309 | Maintain and organise workplace records | |
MSMSUP310 | Contribute to the development of workplace documentation | |
MSMSUP330 | Develop and adjust a production schedule | |
MSMSUP382 | Provide coaching/mentoring in the workplace | |
MSMSUP383 | Facilitate a team | |
MSMSUP390 | Use structured problem-solving tools | |
MSMWHS300 | Facilitate the implementation of WHS for a work group | MSMWHS200 |
TAEDEL301 | Provide work skill instruction | |
Group A units may also be selected from the Group A and Group B units in the PMA and PMB Certificates III, and Group A and Group B1 units in the PMC Certificate III. |
Group B Elective units
Unit code | Unit title | Prerequisites |
FWPCOT2238 | Cut materials with a hand-held chainsaw | |
HLTAID011 | Provide first aid | |
MSTGN3009 | Coordinate work of team or section | |
MEM13003B | Work safely with industrial chemicals and materials | |
MEM16006A | Organise and communicate information | |
MEM16007A | Work with others in a manufacturing, engineering or related environment | |
MEM16008A | Interact with computing technology | |
MEM18001C | Use hand tools | |
MEM18002B | Use power tools/hand held operations | |
MSMENV172 | Identify and minimise environmental hazards | |
MSMOPS100 | Use equipment | |
MSMOPS101 | Make measurements | |
MSMOPS102 | Perform tasks to support production | |
MSMOPS200 | Operate equipment | |
MSMOPS212 | Use organisation computers or data systems | |
MSMOPS244 | Lay out and cut materials | |
MSMPER200 | Work in accordance with an issued permit | |
MSMPER201 | Monitor and control work permits | |
MSMPER202 | Observe permit work | |
MSMPER205 | Enter confined space | MSMPER200 |
MSMPMC308 | Operate slip casting equipment | |
MSMPMC309 | Finish products after firing | |
MSMPMC310 | Hand mould products | |
MSMPMC311 | Operate a firing kiln | |
MSMPMC312 | Operate glass finishing equipment | |
MSMPMC403 | Set up and optimise glass forming process | |
MSMSUP100 | Apply workplace context to own job | |
MSMSUP101 | Clean workplace or equipment | |
MSMSUP106 | Work in a team | |
MSMSUP200 | Achieve work outcomes | |
MSMSUP204 | Pack products or materials | |
MSMSUP205 | Transfer loads | |
MSMSUP230 | Monitor process operations | |
MSMSUP240 | Undertake minor maintenance | |
MSMSUP273 | Handle goods | |
MSMSUP280 | Manage conflict at work | |
MSMSUP291 | Participate in continuous improvement | |
MSMSUP292 | Sample and test materials and product | |
MSMWHS100 | Follow WHS procedures | |
MSMWHS110 | Follow emergency response procedures | |
MSMWHS201 | Conduct hazard analysis | |
MSMWHS205 | Control minor incidents | |
MSMWHS210 | Undertake first response to non-fire incidents | |
MSMWHS212 | Undertake first response to fire incidents | |
MSMWHS216 | Operate breathing apparatus | |
MSMWHS217 | Gas test atmospheres | |
MSMWHS218 | Control the risks of falls | |
MSS402002 | Sustain process improvements | |
MSS402020 | Apply quick changeover procedures | |
MSS402021 | Apply Just in Time procedures | |
MSS402082 | Apply cost factors to work practices | |
MSS402040 | Apply 5S procedures | |
MSS402050 | Monitor process capability | |
MSS402083 | Use planning software systems in operations | |
MSS402080 | Undertake root cause analysis | |
PMBHAN103 | Shift materials safely by hand | |
TLID2010 | Operate a forklift | |
Group B units may also be chosen from:
|