Cert III in Drilling Operations - RII31820
Qualification Overview:
Qualification Name:
Cert III in Drilling Operations
Qualification Code and Units of Competency:
RII31820
Processing time:
You can get your desired qualification through RPL pathways within four weeks of getting the sufficient information and evidence of the supporting documents.
Why study Cert III in Drilling Operations?
This qualification reflects the duties of workers like drillers who carry out tasks requiring a broad range of skilled applications used in a wide number of circumstances, which may entail using some discretion and judgement in choosing equipment, services, or backup plans.
At the time of publication, there were no applicable licencing, legal, regulatory, or certification requirements for this qualification.
How RPL ADVISOR assist you?
We can give you a FREE RPL Quote today !
RPL ADVISOR recognises the need to convert an overseas qualification into an Australian national qualification, and we offer a variety of fast and simple RPL distance training programs through our partner RTOs to meet any relevant requirements for Australia.
RPL ADVISOR can turn your expertise, talents, knowledge, or overseas credentials into a nationally recognised Australian certification through a comprehensive partner network of Registered Training Organisations (RTOs). The RPL evaluation process can often be done with established proof of your skills and does not necessitate further review.
- Photo (latest)
- Passport
- Resume / CV
- Payslips/work contract/ABN if self-employed
- Letter of Employment (onshore / offshore)
- Current employment contracts
- Evidence of overseas qualifications (if available)
- Transcripts or assessments from related previous qualifications.
- Videos or photos at your work (at least 2 from each task)
- Apprenticeship papers (if available)
- OHS/WHS policies and procedures
- Safe work method statements
- Job safety analysis (if available)
- Evaluation: One of experienced RPL ADVISOR consultants can conduct a free, no-obligation RPL skills check.
- Your Experience: Compiling and submitting your ‘Experience Portfolio’, which includes photographs and videos of you on the job, references, past credentials, and your latest resume, among other things.
- RTO Reviews the Evidence: Using an RPL assessment, a certified assessor from one of our collaborating RTOs can review the evidence and decide whether you are competent in the units for that certification.
- Interview: If all supporting documents meet the requirement of the desired qualification, then the RTO may take your interview.
- Your Certificate: If the RTO determines that you are qualified in all relevant units of competency, the Registered Training Organisation will grant you a certificate.
Cert III in Drilling Operations
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Total number of units = 13
8 core units plus
5 elective units, of which:
- no more than two (2) must be chosen from Group A, including at least one (1) ‘Conduct’ unit
- no more than two (2) units may be chosen from Group B
- no more than two (2) units may be chosen from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
CORE UNITS
| Unit code | Unit title |
| BSBWHS301 | Maintain workplace safety |
| MSAPMSUP172A | Identify and minimise environmental hazards |
| RIIBEF301D | Run on-site operations |
| RIICOM201D | Communicate in the workplace |
| RIINHB301D | Set up and prepare for drilling operations |
| RIIRIS301D | Apply risk management processes |
| RIISAM209D | Carry out operational maintenance |
| TAEDEL301A | Provide work skill instruction |
Electives
Group A
| Unit code | Unit title |
| RIIBHD305D | Conduct down-hole hammer drilling |
| RIINHB302D | Conduct reaming |
| RIINHB303D | Install product pipe |
| RIINHB304D | Conduct air drilling |
| RIINHB305E | Conduct continuous flight auger drilling |
| RIINHB306E | Conduct large diameter auger drilling |
| RIINHB307D | Conduct conventional core drilling |
| RIINHB308D | Conduct wireline core drilling |
| RIINHB309E | Conduct guided boring |
| RIINHB310D | Conduct surface directional drilling |
| RIINHB311D | Conduct mud rotary drilling |
| RIINHB312D | Conduct raise boring |
| RIINHB313D | Conduct cable tool drilling |
| RIINHB315D | Conduct top-hole hammer drilling |
| RIINHB316D | Conduct underground in-seam directional drilling |
| RIINHB317D | Install underground in-seam directional drilling standpipes |
| RIINHB318D | Install and operate water and gas control equipment |
| RIINHB319D | Install de-watering conduit and gas drainage equipment |
| RIINHB320D | Construct monitoring bores |
| RIINHB322D | Construct multiple aquifer production bores |
| RIINHB323D | Conduct horizontal directional drilling |
| RIINHB324D | Carry out grouting or cementing operations |
| RIINHB325D | Construct and complete single aquifer production bores |
Group B
| Unit code | Unit title |
| BSBDIV301 | Work effectively with diversity |
| HLTAID003 | Provide first aid |
| HLTAID006 | Provide advanced first aid |
| PMASUP236 | Operate vehicles in the field |
| RIIBHD301D | Conduct surface blast hole drilling operations |
| RIIBHD304D | Set up and prepare for open-cut drilling operations |
| RIIBLA201D | Support shotfiring operations |
| RIIBLA202F | Support underground shotfiring operations |
| RIIBLA205D | Store, handle and transport explosives |
| RIIBLA301D | Conduct surface shotfiring operations |
| RIIBLA303D | Conduct underground development shotfiring |
| RIIBLA304D | Conduct underground production shotfiring |
| RIICTT303D | Control micro tunnelling and pipe-jacking |
| RIIERR301D | Respond to mine incident |
| RIIERR302E | Respond to local emergencies and incidents |
| RIINHB205E | Assist continuous flight auger drilling |
| RIINHB206E | Assist large diameter auger drilling |
| RIINHB208D | Assist diamond core drilling |
| RIINHB209D | Assist guided boring |
| RIINHB210D | Assist surface directional drilling |
| RIINHB211D | Assist mud rotary drilling |
| RIINHB213D | Assist cable tool drilling |
| RIINHB219D | Assist with air drilling |
| RIIOGD304D | Apply effective coal seam gas control practices |
| RIIOGD305D | Apply blow out prevention operational procedures |
| RIIOGD405D | Carry out well control and blow out prevention |
| RIIQUA201D | Maintain and monitor site quality standards |
| RIIVEH305E | Operate and maintain a four wheel drive vehicle |
