Cert III in Engineering - Mechanical Trade - MEM30219
Qualification Overview:
Qualification Name:
Cert III in Engineering – Mechanical Trade
Qualification Code and Units of Competency:
MEM30219
Processing time:
You can get your desired qualification through RPL pathways within four weeks of getting the sufficient information and evidence of the supporting documents.
Why study Cert III in Engineering – Mechanical Trade?
The Certificate III in Engineering – Mechanical Trade outlines the expertise needed by mechanical engineers in manufacturing metal, and related areas. A formal trade recognition evaluation process or a training contract are required to complete this qualification.
This qualification’s skills are meant to be used for a variety of mechanical trade jobs, such as assembling, manufacturing, installing, modifying, testing, troubleshooting, maintaining, and servicing mechanical machinery and equipment, as well as using machine tools.
An industry-recognized skills profile for work as an Engineering Tradesperson – Mechanical is intended to be provided by this certification.
At the time of publication, no licensing, legislative or certification requirements apply. However, in some jurisdictions may relate to licensing or regulatory requirements.
How RPL ADVISOR assist you?
We can give you a FREE RPL Quote today !
RPL ADVISOR recognises the need to convert an overseas qualification into an Australian national qualification, and we offer a variety of fast and simple RPL distance training programs through our partner RTOs to meet any relevant requirements for Australia.
RPL ADVISOR can turn your expertise, talents, knowledge, or overseas credentials into a nationally recognised Australian certification through a comprehensive partner network of Registered Training Organisations (RTOs). The RPL evaluation process can often be done with established proof of your skills and does not necessitate further review.
- Photo (latest)
- Passport
- Resume / CV
- Payslips/work contract/ABN if self-employed
- Letter of Employment (onshore / offshore)
- Current employment contracts
- Evidence of overseas qualifications (if available)
- Transcripts or assessments from related previous qualifications.
- Videos or photos at your work (at least 2 from each task)
- Apprenticeship papers (if available)
- OHS/WHS policies and procedures
- Safe work method statements
- Job safety analysis (if available)
- Evaluation: One of experienced RPL ADVISOR consultants can conduct a free, no-obligation RPL skills check.
- Your Experience: Compiling and submitting your ‘Experience Portfolio’, which includes photographs and videos of you on the job, references, past credentials, and your latest resume, among other things.
- RTO Reviews the Evidence: Using an RPL assessment, a certified assessor from one of our collaborating RTOs can review the evidence and decide whether you are competent in the units for that certification.
- Interview: If all supporting documents meet the requirement of the desired qualification, then the RTO may take your interview.
- Your Certificate: If the RTO determines that you are qualified in all relevant units of competency, the Registered Training Organisation will grant you a certificate.
Cert III in Engineering – Mechanical Trade
To be awarded the MEM30219 Certificate III in Engineering – Mechanical Trade, units of competency to the value of 96 points must be achieved, chosen as outlined below:
- core units of competency listed below (totalling 33 points)
- elective units of competency to a minimum value of 40 points from Groups A, B and C electives as described below
- elective units of competency to a maximum value of 23 points from Group D to bring the total value to 96 points.
To be awarded the MEM30219 Certificate III in Engineering – Mechanical Trade (Machining), units of competency to the value of 96 points must be achieved, chosen as outlined below:
- core units of competency listed below (totalling 33 points)
- elective units of competency to a minimum value of 40 points from Group A electives as described below
- elective units of competency to a maximum value of 23 points from Group D to bring the total value to 96 points.
To be awarded the MEM30219 Certificate III in Engineering – Mechanical Trade (Fitting), units of competency to the value of 96 points must be achieved, chosen as outlined below:
- core units of competency listed below (totalling 33 points)
- elective units of competency to a minimum value of 40 points from Group B electives as described below
- elective units of competency to a maximum value of 23 points from Group D to bring the total value to 96 points.
To be awarded the MEM30219 Certificate III in Engineering – Mechanical Trade (Fitting/machining), units of competency to the value of 96 points must be achieved, chosen as outlined below:
- core units of competency listed below (totalling 33 points)
- elective units of competency to a minimum value of 40 points from Group C electives as described below
- elective units of competency to a maximum value of 23 points from Group D to bring the total value to 96 points.
Appropriate Group D elective units to the value of 8 points may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III. Only select units that would be suitable for occupational outcomes in a mechanical trade environment.
Registered Training Organisations (RTOs) must seek a determination from the industry parties in respect of the allocation of points values for units of competency drawn from other Training Packages or accredited courses. Determination of points requests are to be submitted to the industry parties through Innovation and Business Skills Australia (IBSA) Manufacturing. Refer to the MEM Companion Volume Implementation Guide for information on determination of unit points values.
Prerequisites
Points associated with prerequisites count towards the total. Units with prerequisite requirements are marked with an asterisk (refer to the individual units for details). All prerequisites are included in the units listed.
CORE UNITS
Unit code | Unit title | P | Prereq |
MEM09002 | Interpret technical drawing | 4 | * |
MEM11011 | Undertake manual handling | 2 | * |
MEM12023 | Perform engineering measurements | 5 | * |
MEM12024 | Perform computations | 3 | * |
MEM13015 | Work safely and effectively in manufacturing and engineering | 2 | |
MEM14006 | Plan work activities | 4 | * |
MEM16006 | Organise and communicate information | 2 | * |
MEM16008 | Interact with computing technology | 2 | * |
MEM17003 | Assist in the provision of on-the-job training | 2 | * |
MEM18001 | Use hand tools | 2 | * |
MEM18002 | Use power tools/hand held operations | 2 | * |
MSMENV272 | Participate in environmentally sustainable work practices | 3 |
Elective units of competency
- Packaging for a generic qualification – choose a minimum value of 40 points in any combination from Groups A, B and C
- Packaging for a trade specialisation – choose a minimum value of 40 points from one of either Group A or B or C
Group A – Machining Trade specialisation
Unit code | Unit title | P | Prereq |
MEM05005 | Carry out mechanical cutting | 2 | * |
MEM07005 | Perform general machining | 8 | * |
MEM07006 | Perform lathe operations | 4 | * |
MEM07007 | Perform milling operations | 4 | * |
MEM07008 | Perform grinding operations | 4 | * |
MEM07009 | Perform precision jig boring operations | 4 | * |
MEM07010 | Perform tool and cutter grinding operations | 4 | * |
MEM07011 | Perform complex milling operations | 4 | * |
MEM07012 | Perform complex grinding operations | 4 | * |
MEM07013 | Perform machining operations using horizontal and vertical boring machines | 4 | * |
MEM07014 | Perform electro-discharge machining (EDM) operations | 4 | * |
MEM07015 | Set computer controlled machines and processes | 2 | * |
MEM12003 | Perform precision mechanical measurement | 2 | * |
MEM12006 | Mark off/out (general engineering) | 4 | * |
MEM18003 | Use tools for precision work | 4 | * |
MEM18055 | Dismantle, replace and assemble engineering components | 3 | * |
Group B – Fitting Trade specialisation
Unit code | Unit title | P | Prereq |
MEM05005 | Carry out mechanical cutting | 2 | * |
MEM07005 | Perform general machining | 8 | * |
MEM07006 | Perform lathe operations | 4 | * |
MEM10006 | Install machine/plant | 4 | * |
MEM12006 | Mark off/out (general engineering) | 4 | * |
MEM18003 | Use tools for precision work | 4 | * |
MEM18004 | Maintain and overhaul mechanical equipment | 4 | * |
MEM18005 | Perform fault diagnosis, installation and removal of bearings | 4 | * |
MEM18006 | Perform precision fitting of engineering components | 6 | * |
MEM18007 | Maintain and repair mechanical drives and mechanical transmission assemblies | 4 | * |
MEM18008 | Balance equipment | 2 | * |
MEM18009 | Perform precision levelling and alignment of machines and engineering components | 4 | * |
MEM18012 | Perform installation and removal of mechanical seals | 2 | * |
MEM18013 | Perform gland packing | 2 | * |
MEM18018 | Maintain pneumatic system components | 4 | * |
MEM18020 | Maintain hydraulic system components | 4 | * |
MEM18055 | Dismantle, replace and assemble engineering components | 3 | * |
Group C – Fitting/Machining Trade specialisation
Unit code | Unit title | P | Prereq |
MEM05005 | Carry out mechanical cutting | 2 | * |
MEM07005 | Perform general machining | 8 | * |
MEM07006 | Perform lathe operations | 4 | * |
MEM07007 | Perform milling operations | 4 | * |
MEM07008 | Perform grinding operations | 4 | * |
MEM07010 | Perform tool and cutter grinding operations | 4 | * |
MEM07013 | Perform machining operations using horizontal and vertical boring machines | 4 | * |
MEM07014 | Perform electro-discharge machining (EDM) operations | 4 | * |
MEM07015 | Set computer controlled machines and processes | 2 | * |
MEM10006 | Install machine/plant | 4 | * |
MEM12003 | Perform precision mechanical measurement | 2 | * |
MEM12006 | Mark off/out (general engineering) | 4 | * |
MEM18003 | Use tools for precision work | 4 | * |
MEM18005 | Perform fault diagnosis, installation and removal of bearings | 4 | * |
MEM18006 | Perform precision fitting of engineering components | 6 | * |
MEM18007 | Maintain and repair mechanical drives and mechanical transmission assemblies | 4 | * |
MEM18008 | Balance equipment | 2 | * |
MEM18009 | Perform precision levelling and alignment of machines and engineering components | 4 | * |
MEM18012 | Perform installation and removal of mechanical seals | 2 | * |
MEM18013 | Perform gland packing | 2 | * |
MEM18018 | Maintain pneumatic system components | 4 | * |
MEM18020 | Maintain hydraulic system components | 4 | * |
MEM18055 | Dismantle, replace and assemble engineering components | 3 | * |
Group D – General electives
Unit code | Unit title | P | Prereq |
MEM05004 | Perform routine oxy fuel gas welding | 2 | * |
MEM05005 | Carry out mechanical cutting | 2 | * |
MEM05006 | Perform brazing and/or silver soldering | 2 | * |
MEM05007 | Perform manual heating and thermal cutting | 2 | * |
MEM05012 | Perform routine manual metal arc welding | 2 | * |
MEM05041 | Weld using flame powder spraying | 4 | * |
MEM05049 | Perform routine gas tungsten arc welding | 2 | * |
MEM05050 | Perform routine gas metal arc welding | 2 | * |
MEM06007 | Perform basic incidental heat/quenching, tempering and annealing | 2 | * |
MEM07002 | Perform precision shaping/planing/slotting operations | 4 | * |
MEM07005 | Perform general machining | 8 | * |
MEM07006 | Perform lathe operations | 4 | * |
MEM07007 | Perform milling operations | 4 | * |
MEM07008 | Perform grinding operations | 4 | * |
MEM07009 | Perform precision jig boring operations | 4 | * |
MEM07010 | Perform tool and cutter grinding operations | 4 | * |
MEM07011 | Perform complex milling operations | 4 | * |
MEM07012 | Perform complex grinding operations | 4 | * |
MEM07013 | Perform machining operations using horizontal and vertical boring machines | 4 | * |
MEM07014 | Perform electro-discharge machining (EDM) operations | 4 | * |
MEM07015 | Set computer controlled machines and processes | 2 | * |
MEM07016 | Set and edit computer controlled machines and processes | 4 | * |
MEM07021 | Perform complex lathe operations | 4 | * |
MEM07030 | Perform basic metal spinning lathe operations | 8 | * |
MEM07031 | Perform complex metal spinning lathe operations | 4 | * |
MEM07032 | Use workshop machines for basic operations | 2 | * |
MEM07040 | Set multistage integrated processes | 6 | * |
MEM08010 | Manually finish/polish materials | 6 | * |
MEM08011 | Prepare surfaces using solvents and/or mechanical means | 2 | * |
MEM08014 | Apply protective coatings (basic) | 4 | * |
MEM09003 | Prepare basic engineering drawing | 8 | * |
MEM09011 | Apply basic engineering design concepts | 6 | * |
MEM10002 | Terminate and connect electrical wiring | 3 | * |
MEM10004 | Enter and change programmable controller operational parameters | 2 | * |
MEM10005 | Commission programmable controller programs | 4 | * |
MEM10006 | Install machine/plant | 4 | * |
MEM10010 | Install pipework and pipework assemblies | 4 | * |
MEM11010 | Operate mobile load shifting equipment | 4 | * |
MEM11016 | Order materials | 2 | * |
MEM11022 | Operate fixed/moveable load shifting equipment | 4 | * |
MEM12002 | Perform electrical/electronic measurement | 2 | * |
MEM12003 | Perform precision mechanical measurement | 2 | * |
MEM12006 | Mark off/out (general engineering) | 4 | * |
MEM12019 | Measure components using coordinate measuring machines | 4 | * |
MEM12020 | Set and operate coordinate measuring machines | 2 | * |
MEM13001 | Perform emergency first aid | 1 | * |
MEM13002 | Undertake work health and safety activities in the workplace | 3 | * |
MEM13003 | Work safely with industrial chemicals and materials | 2 | * |
MEM15001 | Perform basic statistical quality control | 2 | * |
MEM15003 | Use improvement processes in team activities | 4 | * |
MEM15004 | Perform inspection | 2 | * |
MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | 2 | * |
MEM18003 | Use tools for precision work | 4 | * |
MEM18004 | Maintain and overhaul mechanical equipment | 4 | * |
MEM18005 | Perform fault diagnosis, installation and removal of bearings | 4 | * |
MEM18006 | Perform precision fitting of engineering components | 6 | * |
MEM18007 | Maintain and repair mechanical drives and mechanical transmission assemblies | 4 | * |
MEM18008 | Balance equipment | 2 | * |
MEM18009 | Perform precision levelling and alignment of machines and engineering components | 4 | * |
MEM18010 | Perform equipment condition monitoring and recording | 4 | * |
MEM18011 | Shut down and isolate machines/equipment | 2 | * |
MEM18012 | Perform installation and removal of mechanical seals | 2 | * |
MEM18013 | Perform gland packing | 2 | * |
MEM18018 | Maintain pneumatic system components | 4 | * |
MEM18020 | Maintain hydraulic system components | 4 | * |
MEM18049 | Disconnect/reconnect fixed wired equipment up to 1000 volts a.c./1500 volts d.c. | 3 | * |
MEM18055 | Dismantle, replace and assemble engineering components | 3 | * |
MEM24001B | Perform basic penetrant testing | 2 | * |
MEM24003B | Perform basic magnetic particle testing | 2 | * |
MEM24005B | Perform basic eddy current testing | 2 | * |
MEM24007B | Perform ultrasonic thickness testing | 2 | * |
MSMENV472 | Implement and monitor environmentally sustainable work practices | 4 | |
TLILIC0003 | Licence to operate a forklift truck | 0 | |
TLILIC0002 | Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) | 1 |